Lifting Frames

Lifting Frames

Lifting Frames & H Frames

We can supply a full range of all types of Lifting Frames both custom built or from stock according to your specifications.

Curved 60 Tonne Wll 14.2m Developed Length Multipoint Lifting Beam Destined For Hinckley Point Nuclear Power Station For Positioning Sections Of The Prefabricated Concrete Reactor Containment Vessel. The Beam Was Rolled To A Precise Radius Of 27.22m. 2 Further 30 Tonne Curved Beams At 27.8m Radius And 15.2m Developed Length Have Also Been Supplied To The Same Site
Nulla quis lorem ut libero malesuada feugiat. Curabitur non nulla sit amet nisl tempus convallis quis ac lectus.
Nulla quis lorem ut libero malesuada feugiat. Curabitur non nulla sit amet nisl tempus convallis quis ac lectus.Nulla quis lorem ut libero malesuada feugiat. Curabitur non nulla sit amet nisl tempus convallis quis ac lectus.
sectionlift Lifting Frames

When a number of vertical lift points are required a lifting frame is often the best solution. Quick and easy setup and increased rigidity support the most flexible of loads. SectionLift have designed a myriad of standard and bespoke lifting frames over many years, and we can provide a complete design service to solve your lifting problems.

advantages of our Lifting Frames

Curabitur aliquet quam id dui posuere blandit. Vivamus magna justo, lacinia eget consectetur sed, convallis at tellus. Sed porttitor lectus nibh. Praesent sapien massa, convallis a pellentesque nec, egestas non nisi. Curabitur arcu erat, accumsan id imperdiet et, porttitor at sem.

Nulla quis lorem ut libero malesuada feugiat. Curabitur non nulla sit amet nisl tempus convallis quis ac lectus.

Versatile

A true “one beam for all” able to provide lifting solutions to many different lift requirements.

Wide Range Of Sizes

We offer standard sizes ranging from 100Kg up to 200 tonnes capacity or designed and built to order. Up to 20m span.

Quick Assembly

Assembling and adjusting lift points made easy by the bottom lift points spaced to suit lifting requirements.

need more

Transport costs can be reduced as the beams can be shipped in component form thus requiring a smaller, more cost effective vehicle.

need more

Relatively small modular lifting beams can lift high loads compared with fixed lifting beam configurations.

12m Long 20 Tonne Multi Point Lifting Beam Beam With Adjustable Upper And Lower Lift Points. This Beam Was Used With 5 Telescopic Lifting Beams Underneath To Build A Modular Tower Block. This Configuration Allowed For Centre Of Gravity Adjustments, Differing Numbers Of Lift Points, Different Lengths And Weights Of Modules All To Be Handled With One Lifting Solution.
12m Long 20 Tonne Multi Point Lifting Beam Beam With Adjustable Upper And Lower Lift Points. This Beam Was Used With 5 Telescopic Lifting Beams Underneath To Build A Modular Tower Block. This Configuration Allowed For Centre Of Gravity Adjustments, Differing Numbers Of Lift Points, Different Lengths And Weights Of Modules All To Be Handled With One Lifting Solution.
12m Long 20 Tonne Multi Point Lifting Beam Beam With Adjustable Upper And Lower Lift Points. This Beam Was Used With 5 Telescopic Lifting Beams Underneath To Build A Modular Tower Block. This Configuration Allowed For Centre Of Gravity Adjustments, Differing Numbers Of Lift Points, Different Lengths And Weights Of Modules All To Be Handled With One Lifting Solution.
10m Long 17 Tonne Self Aligning Multi Point Lifting Beam. This Beam Features 2 Self Aligning Lifting Points Plus Options On Multipoint Lifting. There Is No Need To Constantly Move Shackles To The Desired Position Thus Increasing Production And Making The Working Environment Safer
need original Typical Special Design Multipoint Lifting Beam For General Use Utilizing A Single Point Top Lift
Nulla quis lorem ut libero malesuada feugiat. Curabitur non nulla sit amet nisl tempus convallis quis ac lectus.
3m Long 60 Tonne Multi Point Spreader Beam With Adjustable Lower Lift Points
9m Span 20 Tonne Multi Point Lifting Beam With Built In Adjustable Equaliser Pulleys Designed For Lifting Prefabricated Concrete Wall Sections. These Do Not Necessarily Have All The Lift Points At The Same Level, Hence The Need For The Equalising Pulleys
T Shaped Multi-point Lifting Beam Design To Position Different Lengths And Radii Of Curved Beams On The Outside Of A Building Nulla quis lorem ut libero malesuada feugiat. Curabitur non nulla sit amet nisl tempus convallis quis ac lectus.

the right choice for Material Handling

SectionLift can design, supply and install virtually any Multi Point lifting beam or we can manufacture to your designs. We also offer SectionLift beams from our stock, and can supply for any lifting scenario.

Please Share

Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on pinterest
Pinterest
Share on tumblr
Tumblr
Minimal processing times

SectionLift use state of the art processing systems, and can deal with enquiries quickly and efficiently.

Modern technology

Our modern stock logging systems ensure that we can quickly access information on our stock and services.

Experienced staff

SectionLift staff have vast knowledge of the lifting industry, with a combined 150 years experience in the business.

Top quality

SectionLift are development members of the Lifting Equipment Engineers Association and produce the finest quality lifting beams available.

contact us now For Your LiFting project!

Mauris blandit aliquet elit, eget tincidunt nibh pulvinar a.